Offshore Wind

Malfunction is Not an Option.
Engineers & OEMs In Offshore Wind Choose ZAGO Sealing Fasteners Engineered with 360° O-Ring Technology.

As the world transitions from fossil fuels to renewable energy, offshore wind power is leading the charge as a viable alternative. Generating continuous offshore wind power means that offshore wind turbines, their electrical components, and sensors transmitting real-time sensitive data, must run seamlessly.

Failure Is Not an Option

Engineers designing and OEMs producing offshore wind turbines, blades, sensors, and inner components choose ZAGO corrosion-resistant sealing fasteners for their unique ability to seal equipment without breakage, rusting or leakage – in harsh weather, salty oceanwater and air, extreme temperatures (hot & cold), torrential rains, hurricanes, tropical storms, snow and high winds repeatedly and over long periods of time.

The ZAGO Difference – Screw and O-Ring Engineered as One

ZAGO sealing fasteners are engineered with a custom groove underneath the head of the screw. When combined with a rubber O-ring and tightened, the O-ring squeezes outwardly to form a 360° leak-proof seal. The seal will not break or crack once the screw is torqued preventing seepage or leakage of contaminants, i.e., sand, water, moisture/humidity, dirt, from entering sensitive equipment and damaging it or leaking out and potentially harming our environment.

ZAGO Seal Fasteners Prevent / Withstand

• Saltwater & Salt Air
• Sand, Dirt, Dust
• Water / Precipitation
• Condensation, Humidity & Moisture
• Rust / Corrosion
• Hydraulic Fluids
• Grease
• Extreme Heat / Frigid Temperatures
• Hurricanes, Snowstorms, Hail & Icy Conditions
• High Winds, Prolonged Sun Exposure
• Extreme Pressure & Vibration

Fast Facts

Did you know ZAGO:

• Sealing fasteners may be unscrewed and retightened multiple times, are reusable, and made of corrosion-resistant metals, i.e., stainless steel and steel alloys, titanium, brass and monel.
• Manufactures self-sealing screws, bolts, washers and nuts in custom and standard sizes.
• Offers an array of rubber O-rings in silicone, fluoro-silicone, viton, neoprene, buna, teflon, and EPDM.
• Offers Mil Spec sealing screws and O-rings that meet Military Standards NASM 82496 / MS3212/3213 and pressure- tested to 1,500 PSI.
• Provides samples and usually ships stock parts within two-three days.
• Has a machine shop and cold-heading inhouse.
• Sealing fasteners are made in a sustainable facility powered by solar energy.

ZAGO proudly meets these certifications & standards:

Equipment Applications

• Wind Turbine Face Covers & Inner Components
• Sensors, LiDAR, Radar, Sonar
• 3D Vision Technology / Underwater Cameras
• Electronics & Enclosures
• Electronic Dashboards (Marine)
• Subsea Lighting/Lasers
• Remotely Operated Vehicles (ROVs) / Autonomous Underwater Vehicles, Subsea Robots
• Hydraulic Systems, Pumps, Valves
• Electric Batteries & Charging Stations